Unplug the device from the computer, and then plug it back in. Restart your computer if that doesn't resolve the error. The software for this device has been blocked from starting because it is known to have problems with Windows. Contact the hardware vendor for a new driver.
Contact the manufacturer of your hardware device to obtain the latest version or the updated driver. Then, install it on your computer. Windows cannot start new hardware devices because the system hive is too large exceeds the Registry Size Limit. The system hive has exceeded its maximum size and new devices cannot work until the size is reduced.
The system hive is a permanent part of the registry associated with a set of files that contains information related to the configuration of the computer on which the operating system is installed. Configured items include applications, user preferences, devices, and so on. The problem might be specific devices that are no longer attached to the computer but are still listed in the system hive.
In Device Manager, click View , and then click Show hidden devices. You will now be able to see devices that are not connected to the computer. Select a non-present device. On the Driver tab, choose Uninstall. Repeat step 3 for any non-present devices that you are no longer using.
Then restart your computer. Windows cannot apply all of the properties for this device. Device properties may include information that describes the device's capabilities and settings such as security settings for example. To fix this problem, you can try reinstalling this device. However,we recommend that you contact the hardware manufacturer for a new driver.
This device is currently waiting on another device or set of devices to start. There is currently no resolution to this problem. To help diagnose the problem, examine other failed devices in the device tree that this device might depend on. If you can determine why another related device did not start, you might be able to resolve this issue.
Windows cannot verify the digital signature for the drivers required for this device. A recent hardware or software change might have installed a file that is signed incorrectly or damaged, or that might be malicious software from an unknown source.
Download the latest driver from the hardware manufacturer's website, or contact the manufacturer for help. This device has been reserved for use by the Windows kernel debugger for the duration of this boot session.
This is an intermittent problem code assigned while an ACPI reset method is being executed. If the device never restarts due to a failure, it will be stuck in this state and the system should be rebooted. Update the device driver from Windows Update Update the hardware's device driver through Windows Update. Updated the device driver from the vendor's website Update the device driver from the vendor's website. If the device was preinstalled on the computer, visit the computer manufacturer's website.
In Device Manager, double-click the device type that has the problem. Code 1 "This device is not configured correctly.
Code 1 ". Cause The device has no drivers installed on your computer, or the drivers are configured incorrectly. Recommended Resolutions Close some open applications If the computer has insufficient memory to run the device, you can close some applications to make memory available.
Uninstall and reinstall the driver The device driver may have become corrupted. Full error message "Windows cannot identifythis hardware because it does not have a valid hardware identification number. Recommended Resolutions Contact the hardware vendor.
The hardware or the driver is defective. Full Error Message "This device cannot start. Code 10 " Cause Typically, the device's hardware key contains a "FailReasonString" value, and the value string is displays an error message defined by the hardware manufacturer. Recommended resolutions Update the driver In the device's Properties dialog box, click the Driver tab, and then click Update Driver to start the Hardware Update Wizard. Code 12 "This device cannot find enough free resources that it can use Full Error Message This device cannot find enough free resources that it can use.
Recommended Resolution Windows Vista and later versions of Windows Use Device Manager to determine the source of and to resolve the conflict. Double-click the icon that represents the device in the Device Manager window. Code 14 "This device cannotwork properly until you restart your computer. Code 16 ". Recommended Resolution The following steps might only work if the device is a Plug and Play device.
Double-click the device in the list, and choose the Resources tab. Code 18 "Reinstall the drivers for this device. Code 18 ". Recommended Resolution Reinstall the device driver using the Hardware Update wizard From Start, search for device manager and select Device Manager from the results. Right-click the device in the list. Reinstall the device driver manually From Start, search for device manager and select Device Manager from the results.
Select Uninstall from the menu that appears. After the device is uninstalled, choose Action on the menu bar. Select Scan for hardware changes to reinstall the driver.
Code 19 "Windows cannot start this hardware device… Code 19 ". Full Error Message Windows cannot start this hardware device because its configuration information in the registry is incomplete or damaged. Code 19 Cause This error can result if more than one service is defined for a device, there is a failure opening the service key, or the driver name cannot be obtained from the service key.
Recommended Resolution Uninstall and reinstall the driver From Start, search for device manager and select Device Manager from the results. Revert to the most recent successful registry configuration To roll a system back to the most recent successful configuration of the registry, you can restart the computer in Safe Mode and select the Last Known Good Configuration option, or if you've created a system restore point, you can try restoring to it. Full Error Message Windows is removing this device.
Code 21 Cause This error means that Windows is in the process of removing the device. Recommended Resolutions You can either wait for Windows to finish removing the device or restart the computer. Wait several seconds, and then press the F5 key to update the Device Manager view. Cause The device was disabled by the user in Device Manager. Verify that the network path is correct and the destination computer is not busy or turned off. If Windows still cannot find the network path, contact your network administrator.
You were not connected because a duplicate name exists on the network. If joining a domain, go to System in Control Panel to change the computer name and try again. If joining a workgroup, choose another workgroup name. No more connections can be made to this remote computer at this time because there are already as many connections as the computer can accept. An attempt was made to join or substitute a drive for which a directory on the drive is the target of a previous substitute.
Z80 I fixed those links and added the download link for ControlsAtomFix1. If you still see this bug, then your Delphi application is using a lot of registered Windows messages different from the one in Controls and needs adjusting. See devblogs. Show 3 more comments. If your program uses a lot of windows resources it could be a Resource Heap shortage.
Exit the Registry Editor and reboot the PC for the change to take effect. Good luck. NGLN Steve Black Steve Black 2 2 silver badges 3 3 bronze badges. I'll try this with the client who experiences this the most. I've never been able to reproduce locally Is there any way I can measure whether this heap has been depleted? Marius, how did you get the values to add to your bug reporting? Marius, measuring is not always as easy as checking the handle limits, but you can read about it here: stackoverflow.
SteveBlack my sharedsection shows in yyyyy what value do i change it to? Show 1 more comment. In a few words: Delphi source has bugs that is causing you this problem! Let's understand what is going on: Windows has a memory area called "Atom table", wich serves to applications communicate each other see more. First, open the unit Controls. It just runs the following code every hour: procedure GarbageCollectAtoms; var i, len : integer; cstrAtomName: array [ That should be an integer, but it's not!
Late Update: Also, that is the source of this error: Application error: fault address 0xafb. Community Bot 1 1 1 silver badge. Christian Christian 6, 9 9 gold badges 48 48 silver badges 77 77 bronze badges. Thanks Christian. I'll put this into our next release and see if it helps. Thanks for sharing — Marius. I confirmed 'til Delphi 7 pretty old Probably they already fixed or not?
Never saw it happening with other applications than those built by Delphi. Christian - but I have this bug in Delphi XE7! Christian - procName is not initialized! HS1 HS1 21 1 1 bronze badge. Thank you, -Mitchell. Monday, May 23, PM. This can be beneficial to other community members reading the thread.
Thursday, May 26, AM. Diagnostics on memory and harddrive come up fine. Tuesday, May 24, PM. Hi, Would you please let me know if you could boot in windows now? Best Regards, Niki Please remember to click "Mark as Answer" on the post that helps you, and to click "Unmark as Answer" if a marked post does not actually answer your question.
Wednesday, May 25, AM. Thanks, -Mitchell. Wednesday, May 25, PM. Niki, I only registered and signed in to be able to give you all my thanks. Can't say thank you enough!
Sunday, August 7, PM.
0コメント