Current flows from L1, through the transformer, to the neutral side of the line. It is located at the upper left rear corner of the oven cavity.
A sensor resistance of less than ohms is regarded as a shorted sensor, and a resistance greater than ohms is regarded as an open sensor. When the oven control senses a resistance of less than ohms, and greater than ohms, the bake and broil functions will be turned off.
Self Fixer. Whirlpool Super capacity freestanding Gas and Electric Ranges manual. Anything below this line is NOT a product description. Once manual is downloaded any number of pages could be printed or it could be printed in whole. Manual could be opened on any mobile device like iPad, iPhone or Android device etc. Apple Computers have native support for PDF files. Your Name:. Page L. Conversion L. Conversion Kits will be shipped with the product.
Kits include four top burner orifice spuds. Page 17 L. When the solenoid is activated, the plunger extends, and the actuator rod moves the latch to lock the door.
As the ignitor heats up, its resistance decreases. Page 20 Lower ignitor resistance increases the current flow through the bimetal coil. When the ignitor is fully heated, its resistance is low. Low resistance causes maximum current to flow through the bimetal coil 2. Page 21 The gas at the burner is lit by the hot ignitor and a flame is produced. With no voltage applied, the ignitor and bimetal coil start to cool. Current flows from L1, through the transformer, to the neutral side of the line.
A thermal fuse is used on electric models with EZ and EZ oven controls. Both the Bake and Broil elements can cycle independently or together to maintain more even temperatures. The oven door is removed by a loosening the two screws at the inner door panel and lifting up. Page 30 The sealed gas burner venturi can be adjusted by a loosening the screw at the slide cover and turning the cover to the desired setting. Page 31 C.
0コメント