Atx power supply tester software

If you are looking for a power supply tester from a well-known and reputable brand then Thermaltake Dr. Power II is what you should buy. It is also of the best power supply testers available in the market. If you are getting a 0 ms value, then it means the power supply is dead and not functioning. The device has built-in output connectors diagnostic system, low-voltage, high-voltage, no voltage, PG alarm systems to notify you of any errors, instability, or abnormal behavior with the power supply.

Buy Thermaltake Dr. A generic power supply tester with a metal body made of aluminum alloy. It comes with a 1. To use the device, just insert the pin or pin and P4, P6, or P8 plug into the corresponding position of the power tester.

If the values of each group do not flash, it indicates that the power input of this power supply is normal. If the voltage signal of a circuit is not detected such as a pin or pin connector or the detected voltage exceeds the normal range, the buzzer will send out a warning sound for a long time. It can also help prevent oversizing the PSU, which can result in higher total cost since the system cannot benefit from greater efficiency at loads it can never achieve. For power supply sizing, power budget, or component power measurements, your system is tested while monitoring the platform AC and all main DC power rails from the ATX power supply to the system.

You can provide your own software program or choose from these examples to get different results:. Skip To Main Content. Sign up Log in. Following Follow project. Liked Like project. Become a Hackaday. Remember me. Sign up. Forgot your password? Just one more thing To make the experience fit your profile, pick a username and tell us what interests you.

Pick an awesome username. Your profile's URL: hackaday. Max 25 alphanumeric characters. Five operating modes Inline mode. The PSU tester can be used in standalone mode. Product Gallery Protective Case. Shipped in a hard, padded, protective case. The PSU tester is stored in the case in a custom foam cutout. Can be operated in inline or standalone modes. The different information screens can be displayed by scrolling using the buttons on the unit.

Test for ripple on main voltage rails, measure the minimum slew rate on main voltage rails during power up. Right-click to download in MP4 format. Safety Precautions.